How To Remove Scratches From Plastic Phone Case?

How do you get scratches out of a plastic phone case?

Shallow Scratches

  1. Clean the plastic surface with a damp cloth, rubbing in a circular motion around the scratch.
  2. Apply a mild abrasive, such as toothpaste, furniture polish, baking soda or plastic polish to the scratch.
  3. Wipe a clean cloth over the paste you have added in a circular motion.

How do you remove scratches from black plastic?

Thoroughly dust the black plastic surface with a clean cloth. Then wipe it down with rubbing alcohol. Take a small dab of the scratch remover or metal polish and apply to a clean cloth. Buff the affected areas with the remover until the scratch is gone.

How do you remove scratches from red plastic?

Combine equal parts water and baking soda to create a thick paste and apply with a cotton round or cloth, working in into the scratch with gentle, circular motions. Rinse periodically to check your progress, repeating until you’ve completely removed the scratch.

Does toothpaste really fix scratches?

Yes, toothpaste can remove minor paint scratches. A standard toothpaste (not a gel toothpaste) has a minor grit to it which helps buff out the scratches. Typically, minor scratches are only on the clear coat over your actual paint.

You might be interested:  Quick Answer: How To Remove Plastic Clip On Whirlpool Dryer Timer?

How do you polish black plastic?

How To Use

  1. Step 1) Apply the Plastic Restore (black trim restorer product) Give the plastic trim a generous spray with Torque Detail Plastic Restore, making sure to cover every area.
  2. Step 2) Restore. Take your clean microfiber towel and wipe away the excess liquid from the surface.
  3. Follow-up coats. Voila!

How do you remove scratches from black plastic trim?

You first clean the scratched plastic surface using a general car interior cleaner and dry it off using a microfiber towel. After that, apply the toothpaste or similar product onto a damp cloth and rub it onto the scratched surface in circular motions. Keep doing so until the scratches disappear.

How do you get scratches out of acrylic plastic?

1. Wet one piece of 600 grit sandpaper – run it over the scratched area in a circular motion and repeat with a dry piece of 600 grit sandpaper too. Rub with both wet and dry sandpapers for around 3 to 3 minutes. Don’t worry if your acrylic looks more frosty or scratched – this will go away during the process.

How do you make plastic clear again?

You can polish your plastic items and make them clear and shiny again with special cleaning products and common household items.

  1. Squeeze a bit of toothpaste onto a soft cloth or dip the cloth into a paste of baking soda and water.
  2. Rub the cloth over your plastic in a circular motion.

Can you buff scratches out of plastic bumper?

You will need to use an 80-grit then 120- grit followed by a 200-grit sandpaper and sanding the whole affected area until it merges with rest of the bumper. It is the final step of scratch removal from the plastic bumper. Apply wet coat of sealer and after drying, put primer and again wait for it to dry.

You might be interested:  FAQ: How To Remove Plastic Retainers?

Can WD 40 remove scratches on car?

For scuff marks to cars, make sure the area is clean then simply spray it with WD-40 Multi-Use Product and let the lubricant in the WD-40 Multi-Use Product loosen the scuffed paint. Then simply wipe it off with a soft cloth. Just spray it on, let it sit for a few seconds, and wipe it off with a cloth.

Can you polish plastic?

Polishing with Toothpaste or Baking Soda Toothpaste and baking soda are both mild abrasives that you can use to polish plastic. For deeply etched or discolored plastic, squeeze non-gel toothpaste directly onto the surface and rub it in a circular motion with a microfiber or cotton cloth.

How do you smooth plastic surfaces?

Use a 50/50 solution of vinegar and water to clean extensively pitted plastic, because vinegar is a weak acid, and it helps smooth the surface. Run through the sanding grits in order from 220- to 400-, 800- and 1,200-grit, finishing with 1,500- or 2,000-grit, depending on how smooth you want the surface.

Leave a Reply

Your email address will not be published. Required fields are marked *