How do you unscrew a plastic nut that won’t budge?
Whether you use a basin wrench or a hammer and screwdriver, the nut is easier to loosen if you heat it with a hairdryer. The heat should soften the plastic and make the nut pliable enough to break free. It also helps to spray some calcium dissolver on the nut and wait several minutes before tapping or twisting.
How do you remove Bemis toilet seat plastic bolts?
If you have a Bemis seat featuring the TOP-TITE ® STA-TITE® Seat Fastening System™, first open the hinge caps. Next, use the wrench to loosen the bolts, reaching below the bowl to hold the wing nuts in place as you do this. Remove all the bolts and nuts and then lift the seat off the bowl.
How do you remove a plastic faucet stem?
Insert a flat-head screwdriver into the notch to pry the plastic insert out of the handle. Insert the blade of a utility knife in the seam between the insert and the faucet handle, if there is no notch present. Twist the utility knife handle up and down to pry the insert off.
How do you remove a hard toilet seat?
When it comes to removing toilet seats, the big gun is a drill with a 1/4-inch drill bit. Put on goggles to protect your eyes; then insert the bit into the bottom of a stuck metal nut that you can’t turn at the point at which it meets the bolt. Drill a hole straight up through the inside edge of the nut.
How do you unscrew a nut under a toilet bowl?
Simply unscrew the nut from the attached bolt. Corroded bolts and nuts are harder to detach. To remove the nut from the seat hinge bolt, use a long socket and socket wrench to unscrew the nut. If the nut will not budge, you may need to cut the bolt off.