Readers ask: How To Remove Stuck Faucet Plastic Nuts?

How do you remove plastic faucet mounting nuts?

Crawl under the sink (preferably wearing a headlamp) and get in position. Open the jaws of the wrench, insert the long pole up behind the sink and hook the jaws onto the faucet nut. Be sure they are facing in the direction you need to turn the nut (counterclockwise) so they will automatically lock onto the nut.

How do you unscrew a plastic nut that won’t budge?

Attempt to turn the nut by hand counterclockwise. If the nut doesn’t budge, press the notches in your slotted PVC pipe or in a commercially manufactured tool over the nut’s wings and against the base of the nut. Turn the tool counterclockwise to loosen and remove the plastic nuts.

How do you remove a faucet holding the nut?

Using a basin wrench, reach up behind the sink basin from inside the vanity cabinet and grip the mounting nut that holds one of the faucet valve tailpieces to the sink or countertop. Turn the nut counterclockwise (viewed as you look upward at the nut from below) to loosen it, and unscrew it down the threaded tailpiece.

How do you loosen old faucet nuts?

Share All sharing options for: Loosening a Stuck Nut

  1. Tighten the nut. Moving the nut in any direction is progress.
  2. Tap with a hammer. Jarring the nut can break its bond to the bolt.
  3. Apply heat. Metal expands slightly when hot, which may be enough to crack the nut free.
  4. Soak the nut.
You might be interested:  Quick Answer: How To Remove Dust From Plastic In Photoshop?

How do you unscrew a lock nut?

Cut the nut with a hacksaw — directly across the center — so it is split on the face and not along the diameter. Press the edge of a flat head screwdriver into the cut you made and hammer the screwdriver into the cut, until the nut splits off the bolt or screw.

How do you loosen a faucet handle?

If it’s stuck, wrap a rag around it, give it a few light taps with a hammer and try again. Squirt a few drops of penetrating oil or spray lubricant into the space between the handle and the valve stem. Wait a few minutes, then tap the handle and try pulling it off. Place a scrap piece of wood on the faucet body.

Leave a Reply

Your email address will not be published. Required fields are marked *